About this 3D model

--- ? Description --- Did you or your significant other receive some Bath And Body Works 3 wick candles for the holiday season? If so this amazing flowing heart candlestick is sure to complement it and your home décor. A Heart is showcased in this candlestick that is sure to receive many compliments from friends and family. * CAUTION * 3 Wick candle containers can reach temperatures of 60C or higher. Suggest using high temp filaments such as PETG for your candlestick or do not burn it past 2/3'rds using the candlestick as to prevent any softening of the plastic. Personally I tested this with PLA and a BBW candle for 4 hours (the max recommended burn time of a 3 wick candle) and had no issues whatsoever using 2/3rd or less of the candle. PETG, ASA, etc. should work much better than PLA but you can print this in PLA providing you keep safety in mind. --- ?️ Printing Tips --- You will want to print this slower around the heart and the upper pedestal to allow for additional cooling on the overhangs. There is also a colored 3MF for bambu included, this has some awesome paint styles that further enhances the model. --- ? Additional Information --- * CAUTION * 3 Wick candle containers can reach temperatures of 60C or higher. Suggest using high temp filaments such as PETG for your candlestick or do not burn it past 2/3'rds using the candlestick as to prevent any softening of the plastic. Personally I tested this with PLA and a BBW candle for 4 hours (the max recommended burn time of a 3 wick candle) and had no issues whatsoever using 2/3rd or less of the candle. PETG, ASA, etc. should work much better than PLA but you can print this in PLA providing you keep safety in mind. --- ⚖️ License --- **Commercial Restricted License (with subscription)** ? ? *Attribution* | * Resale with Thangs Subscription*