About this 3D model

FIRST OF ALL : NOTICE: THIS IS A SIMPLE PRINT. AS YOU SEE IN THE PICTURES , MY MODELS , THE CAPS , THEY STICK VERY GOOD ON THE BED. SO BEFORE YOU GIVE BAD RATING TO MY PROFILES, BE SURE YOU HAVE A GOOD BED ADHESION AND ASK TO YOURSELF , WHY YOU DON'T HAVE A GOOD BED ADHESION. THOSE ARE 3 GOOD PROFILES , I USED THE THE LAST ONE (180° UPSIDE DOWN , 0.9mm LAYET HEIGHT EXTRA FINE AND SLOW PROFILE AND SANDING :TOP QUALITY) I DON'T WANT TO UPLOAD A LOT OF PROFILES FOR EACH SINGLE PROBLEM YOU HAVE AND FOR EVERY SINGLE MODEL! EVEN YOU WANT TO SHARE ONE , IT DOESN'T MAKE SENSE FOR THE SIMPLE MODEL ITSELF! PLEASE, LIKE I SAID THE CAPS STICK ON THE BED EASY! NOT ALWAYS THE SPEED CAN HELP YOU TO STICK EVERY MODEL ON THE PLATE! THANK YOU FOR THE UNDERSTANDING! CAPS WERE PRINTED ON THE ORIGINAL BAMBU LAB TEXTURED BOTH SIDE PLATE. MODEL: I design this screw caps for the back side. It fits in the X1C, X1 , X1E , P1P and P1S. PRINTED WITH BAMBU LAB BLACK ABS. NOTICE: PAY ATTENTION TO THE PROFILES INFORMATIONS AND SETTINGS! PROFILES: 1 STANDARD QUALITY AND FAST PRINT 2 EXTRA FINE PROFILE AND TOP QUALITY. FOR THIS PROFILE YOU NEED 1 SHEET OF 800 SAND PAPER AND 1 SHEET OF 1200 SAND PAPER, WATER AND A SPONGE. YOU NEED THOSE TO DO A POST PROCESSING OF THE CAPS AND YOU REALLY SEE A BIG DIFFERENCE LET'S SEE THEM SIDE BY SIDE: I PREFER THE SANDED CAPS! THEY LOOK AMAZING AND THOSE ARE PRINTED WITH BAMBU LAB BLACK ABS AND IT'S THE SAME COLOR OF THE PLASTIC COVER! HOW TO PRINT THE SECOND PROFILE: APPLY GLUE ON THE HIGH TEMPERATURE PLATE!!!! PRINT THE CAPS WITH THAT SETTINGS. TO HAVE LESS GAPS OF THE FIRST LAYER I MODIFIED THE FIRST LAYER , SO DON'T CHANGE IT! TAKE THE PRINTED CAPS , SAND THEM FIRST WITH 800 SHEET SAND PAPER AND AFTER WITH THE 1200 SHEET SAND PAPER PUT A BIT OF WATER ON THE SPONGE , CLEAN THE CAPS AND WASH THEM. SEE THE BIG DIFFERENCE? APPLY THE CAPS AT THIS LINK YOU WILL FIND THE CAPS BLANK: https://makerworld.com/it/models/126376#profileId-136547 AT THIS LINK YOU WILL FIND THE CAPS WITH THE NUMBERS: https://makerworld.com/it/models/126383#profileId-136558 If you have problems about this model, just send me a private message and I'll help you. Give me a like and follow my page. Thank you to support me and happy printing.