About this 3D model

This mount is to add a 12mm laser crosshair for the Creality Falcon 2 22/40w laser engraver/cutter. I removed the original cable from the laser module by opening the module. I took the cheapest USB-C cable and cut it to about 10 cm, the cable only had 2 cores, the end of which I cleaned and soldered to the place of the original cable. Extra hardware: 6mm screw to replace the 4mm from the laser module, (the screw is part of the Falcon2 package) Print Settings: 0.2mm Layer material: PLA (or any) Filament used(g): 2.7g Filament used(m): 0.91m Est Cost (PLA): $0.08(eur) Print time: ~8min