About this 3D model

You can scale as big as will fit, but DO NOT scale Z height. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Yellow Transmission Distance: 6 Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #15 (1.28mm) swap to Yellow for the rest.