About this 3D model

My first CAD designed from scratch and printed item. I have a lot of home automations and smart devices and have been using Aqara wireless mini switches to trigger and control a lot of them. Originally I had them stuck to the wall with the either the double sided tape they ship with, or the 3M velcro-like easy remove strips (which can make changing the battery slightly problematic) and it just didn't looks great. It may only be a ‘me’ problem, :) , but my house wiring is simply refuses to allow me to install wired smart switches, and sometime you just might not want to deal with turning off a breaker and installing a new switch. So, this will allow the buttons to be slotted into the top (other buttons of similar size should work just fine as well) and I notched the top a bit to hopefully make it easy to remove the button from battery changes. If installing a direct line smart switch, it's going to likely go where a light switch is anyway, so while the light switch is still there it's a pretty decent spot to just use what exists to mount a button either way. Print quality looks a little off in the picture, but that's just my being new to printing and not an issue with the file. I printed others which dialing in the sizes and they were great. Of course the one that is spot in sizing printed a little less than perfect :) I printed it with basically default settings on a P1S. It was a good project for me to get my feet wet with and solve a minor ‘problem’ around the house with the new printer.