About this 3D model
Dimensions (LxWxH) 170 x 64 x 36 mm (100% scale) Basic information A long awaited, fifth addition to the Articulated Sea Life collection, the Beluga whale is here! It was designed to print as easily, and as reliably, as possible. No post processing, or tweaking is needed. The model is fully functional right off the buildplate, and doesn't require any additional assembly. Included files I've included one raw .stl design file, as well as 2 .3mf project files , one singlecolor, and one multicolor. Material PLA Layer height ≤0,2 mm or >0,2 mm + variable layer height Infill >10% Support None. The model was designed not to require any support material. Scaling The model should come out perfectly functional even at lower scales. Tested up to 60% of the original scale. Results may vary depending on the accuracy of your setup and quality of the materials used. Orientation Default, laid flat on the belly Adhesion aid Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards. All resolved past issues with the model files and detailed information about their fixes will be listed in this section. If you're having any problems which aren't on this list, please visit the Known issues section below. If you don't see your problem mentioned there as well, please leave us a message with more details, so that we're able to address it as soon as possible. 12/22/2024 Updated the image gallery. Replaced the previously included .3mf file with two project files compatible with Bambu Studio Minor changes to the model description There currently aren't any known issues/work in progress. If you run into any, please contact me via dm. My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.