About this 3D model

Boost Me You like my work? Support me with a boost! Before installation, you can slide the basket onto the holder a few times to get the mechanism really smooth - it's very quick! Have fun trying it out! Installation and demonstration (GIF: click picture if not playing): Highlights: Quick to print (1-2h, depending on basket size), no supports and after printing you only have to push the basket onto the holder a few times and everything runs smoothly Basket snaps in easily and can be pulled off to the front Different basket sizes and if no basket is attached, you can still use the holder as a poop deflector (very useful if you only occasionally have large multi-colored prints) - my favorite size is “S” by the way The baskets are light and stable but also flexible (due to the flexibility of the walls, nothing happens if something gets stuck somewhere - this is sometimes criticized, but I want it and it should actually be standard for parts that are attached to moving parts of the printer) Printable TPU inserts if you want a very quiet solution (alternatively you can fold a piece of paper or similar) No holes and logos - this makes everything more minimalistic and no small strips or threads get caught when emptying the basket For the larger baskets I have inserts that make the bottom slanted, these hardly need any filament and are very light. The holder is very stable on the printer The curves and small design details are based on the design and dimensions of the A1 Space to throw the test strips and smaller supports directly into the basket (even with the smallest basket) More Information: Use the wide version with the A1 or also with the A1-mini if you always place everything exactly on the A1-mini (if you are using the wider version on the A1-mini, test this with the printer control before your first print!) Story and information behind the model: When I got my A1 mini, I had no free space to the left of my printer, so I had to resort to solutions attached to the printer. The baskets that were available in the beginning were very limited and impractical for everyday use (at that time there were only fixed or very playful ones) That's why I created a system that is minimalist and flexible. Check out my other models!: https://makerworld.com/en/u/2166054501 Updates: Christmas Update 17.12.24 The holder is now easier to attach, which should solve a stability problem for some. Basket size L has been added. For basket sizes L and XL, there is now an insert that makes the base sloping without increasing the weight significantly, which can be found in the pressure profiles for the respective sizes. Update 03.12.24 The click mechanism for the baskets now clicks a little more easily. In addition, a version of the holder has been added which has a stronger click mechanism. Big Update 22.11.24 Now it is called Poop Basket System (PBS) Now thinner, more stable, more reliable, easier to print and a little quieter from the start - thanks to all your ideas and comments that I have taken to heart! Update 29.08.24 Fixed TPU inserts with walls for the thinner baskets Update 28.08.2024 Added a thinner deeper standard basket without the outer lettering and a corresponding TPU insert with walls Update 06.04.24 added TPU inserts with walls Update 28.02.24 added a step file for remixing the baskets (remixing means major changes, not just adding a logo, have fun!) Update 02.02.24 The dubios lettering has been removed from the front and is now on the inside. Update (01.02.24) New design to meet the new community guidelines. The chamfer at the bottom of the baskets has been removed to minimize rare print problems. BIG BOY basket has been removed - use L or XL basket. Minor fixes on the L (deeper standard) basket and XXL basket. The lightweight edition has been updated with the new purge deflector design (still thinner) and the basket has been updated (like the thinner standard basket, but for the lightweight rinse deflector). Added TPU mats for the Thinner standard basket and lightweight basket. Update (28.01.24) The purge deflector connection to the printer is now a lot more stable tahn the old version to work well with the new baskets. Purge deflector design update (rounded corners) and little details. New baskets versions for the standard pms available, for a better overview, these have been published as remixes. Update 27.01.2024: Vibration damping mats that you can print with TPU are now available for the standard basket and the BIGBOY basket (see instructions before printing). All purge deflectors for Standard mini pms sitting now more stable on the purge wiper than the old version. The BIG BOY basket is slightly smaller at the back, which has solved a problem when used on the A1 mini. The stronger basket lock for special Filaments - purge deflector for Standard mini pms is now suitable for most PLA-Matte filaments without grinding. Very strong basket lock version which you can than customize by grinding has also been added A v