About this 3D model

Bambu Lab - Faster Start - reduce waiting time | G-code trick Bambu's 'Machine start G-code' preheats the headbed and wait for it to be heaten until the printer moves on with preparations. This change in the machines G-code will move the 'wait for bed temp' to a later position since this is an unnecessary delay. Meanwhile the printer can continue with preparations and you safe time on print-duration. To-Do: Go into BambuStudio or OrcaSlicer and search for your printer (should work an all Bambu printers) - click the ' little icon ' next to the printer ( 1 ) - In the printer settings, click on ' Machine G-code ' tab ( 2 ) - In the ' Machine start G-code ' section ( 3 ), scroll down and look for the lines ;===== heatbed preheat ==================== M1002 gcode_claim_action : 2 M140 S[bed_temperature_initial_layer_single] ;set bed temp M190 S[bed_temperature_initial_layer_single] ;wait for bed temp - Now cut-out (ctrl+x) the following line M190 S[bed_temperature_initial_layer_single] ;wait for bed temp - and paste it right befor the section of the bed leveling M190 S[bed_temperature_initial_layer_single] ;wait for bed temp ;===== bed leveling ================================== - now safe your 'new' printer profile (use a different end naming or such) and select it as your 'printer' in the dropdown menu. Notes: - If you do more small single objects, the gained print time saving is great. - Bambu may change the printer profiles in the future, make sure you always check if they added this feature (maybe?!) - I recommend after a firmware/software/profile upgrade to do this steps again - so you make sure to benefit from the latest versions and dont mess up things AS WITH ANY CUSTOM G-CODE, PLEASE REVIEW BEFORE USING, AND USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR PRINTER. If you wanna get less poop on multicolor-prints, check this out: https://makerworld.com/en/models/91241