About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 2.9 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #12 (1.12mm) swap to Blue Gray At layer #19 (1.68mm) swap to Ash Gray At layer #22 (1.92mm) swap to Jade White for the rest.