About this 3D model

I've used this template for several of my coaster set designs and someone requested a blank coaster that they could add their own text (or graphic) to. Can be printed without an AMS with pause at height to change filaments. Direct in Bambu Studio : Add text, shapes or even STLs directly in Bambu Studio: If you open the 3mf file in Studio, there are 1 blank coaster, 1 blank holder and 1 example coaster. The example coaster shows adding text and a cylinder shape with Studio to create a void through the main top coaster layer to the colour below. Using this example, you can hopefully replicate the process with any text or shape (imported stl should work!). NOTE : using an SVG that was converted to STL as a negative part should work nicely. Make the imported part at least 1mm thick and embed it 1mm below the top surface. Make it bigger : If you want it larger (or smaller) in diameter, scale X and Y independent of Z. Optional in CAD: I've attached the STEP files for a blank coaster and a blank holder. These can be imported in to CAD software to add text or graphics to as a 1mm cut from the main top surface of the coaster/holder. This will expose the colour below. After that, save as a STEP and import into Bambu Studio then Split them to parts and set the filament colours/materials as you want. Easy peasy. As always: show me your prints! And feel free (as per license) to upload your design for others to print, share, sell, etc. Coaster “Construction” 1st colour: 1mm base (can be same as Insert Colour, but I prefer same as top colour) 2nd colour: 1mm Insert Colour 3rd colour: 1.4mm top colour (I use 1st colour again). This includes the raised ring. hat is 0.4mm above the main coaster top surface. For my D&D coasters, I used inverse colour scheme for the coaster and the holder (coaster main gold, holder main gold). I think I like this best but my 3mf is not coloured this way. Easy to fix and set colours to your preference.