About this 3D model

Magic Mouse Dock with Desk Mount (Affixed by hardware screw or double-sided tape (2x bases to choose from)) NOTE: This model is designed to fit the Apple Lightning to USB Type-C charging cable. A charging dock for the Apple Magic Mouse (lightning port rechargeable). I have designed two bases that are able to be affixed to surfaces either by double sided tape or by 3x 3mm hardware screws. The dock itself has a channel to feed the USB charge cable underneath. In order to install the cable - 1- Insert the lightning end of the charge cable through the port at the end of the affixable base. 2- Guide the lightning end of the charging cable up through the base (in the correct orientation) and out the top. 3- Orient the lightning end of the charging cable opposite to how it was when inserted in the base. 4- Firmly seat the lighting end of the charging cable in the dock, this is supposed to be a very snug fit. 5- Feed the charging cable through the channel on the underside of the dock and out the front. 6- Slide the dock into the fixed base. Hardware - Machine: BambuLab P1S. Plate: Textured PEI Plate. Hot end: 0.4mm hardened steel nozzle. Settings - Print Speed: Standard/Normal Filament: Bambu Labs PLA Matte Process: 0.20mm Standard - Mostly Default with the below changes - Strength- Wall Loops - 4 Detect Thin Walls - Checked Sparse Infill Density - 24% Support- Enable Support - Checked Type - Normal(auto) Others- Brim type - No-brim