About this 3D model

Filament Hanger My printer sits in a tight spot that restricts access to the rear. I have designed a hanger that allows for my filaments to be hung above my printer. This allows me to see remaining filament but also make it easier to change/replace filaments. There are 4 different hooks included in this print - 1x Stadium shaped hook (designed for my needs) with an end diameter of 15mm. 1x Cylindrical shaped hook, 25mm Diameter. 1x Cylindrical shaped hook, 20mm Diameter. 1x Cylindrical shaped hook, 15mm Diameter. The Machine bolts and nuts I have used to secure the hook with the main body are - 2x M2.5 x 6mm x 0.45p Metric Coarse Stainless A4-70 G316 Socket (T8) ( https://www.boltandnut.com.au/machine-screws/cap-head/m2-5-x-0-45p-metric-coarse-stainless-a4-70-g316-socket-t8-machine-screws-iso-14579 ) 2x M2.5 x 0.45p Metric Coarse Stainless A4-70 G316 Hex NYLOC Nuts ( https://www.boltandnut.com.au/m2-5-x-0-45p-metric-coarse-g316-stainless-hex-nyloc-nuts ) The bearings used - 2x 608RS Ball Bearings (8x22x7) 20 Pcs, 608-2RS Skateboard Bearings Rubber Sealed Deep Groove Ball Bearing ( https://www.amazon.com.au/gp/product/B0BN5N9QNR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 ) Machine Configuration - Printer: BambuLab P1S Plate: Textured PEI Plate Hot end: 0.4mm hardened steel nozzle. Filament: Bambu Labs PLA Matte My Process settings for this print 0.20mm Standard (Filament Hanger) - Default with the below changes - Strength- Wall Loops - 3 Detect Thin Walls - Checked Sparse Infill Density - 24% Support- Enable Support - Checked Type - Normal(auto) Others- Brim type - No-brim