About this 3D model

Boost Me Whether this eye gave you chills or not, I'm sure you'll appreciate the work that went into its design and the success it's having. Purple button? :D UPDATE 19/02/25: Version v2.2 added: Modified the support to a tight style: It is somewhat easier to remove and uses less filament. Separated the 2 black colors (Iris and pupil) to be able to adjust the pupil of 2 different colors. Added new profile for magnetic cover with adapter . The eye is again very visible inside the transparent cover. INTRO I'm tired of seeing discs and wheels like this that are poor quality and don't take advantage of 3D relief, so I designed my own. In this case I share with you “EyeBall”, in multiple color with 3D effect It is designed to be printed in two separate pieces on the same plate and easily assembled. Why print it in two pieces? The process of color change during so many layers and the color transition means that it does not cause the same sensation of realism, so I finally decided that the iris part would blend with the completely flat black color. Part A prints very easily. Part B is delicate to print, since at the moment it is designed to be printed surrounded by support. V1 left the first black layers of the iris too uneven due to the support. V2 corrects this by making part A go deeper into part B If you have a Posca PCF marker or a brush, you can paint the red scratches