About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Matte Charcoal Transmission Distance: 0.6 PLA Matte Dark Red Transmission Distance: 1.5 PLA Matte Ash Gray Transmission Distance: 1.5 PLA Matte Ivory White Transmission Distance: 6 Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Dark Red At layer #11 (0.96mm) swap to Ash Gray At layer #20 (1.68mm) swap to White for the rest.