About this 3D model

A simple narrow spool holder thats customisable in length and fits on a narrow shelf Why? I wanted to use one of the many other awesome designs but they were all a bit over engineered for me and a model i tried was far too deep for my 185mm deep shelves. I also wanted a holder I could push back against the wall on the shelf and not have the spools hitting the wall everytime I placed them. Specs Fits on a 185mm Deep Shelf Suits 15mm (1/2inch) PVC with OD of 21.4 (Pressure or Elec Conduit) - Available at Hammer Barn in Australia OR 20mm (3/4inch) PVC with OD 26.8mm (Pressure or Elec Conduit) - Available at Bunnings in Australia Use whatever length you like! 580mm Lengths worked pretty well for 8 Spools for me. Designed to push up against a wall on a shelf and keep the spools away from the wall. Included a small test piece to check tube size before commiting to the print. Can then scale the model as appropriate. Less than 80g of plastic to make. More to Come Happy to add custom sizes on request. (Tube size or Depth for shallower shelves) *On the 2 sizes of pipe I had to test on, the OD varied along their length so I highly recommend printing the test pieces first and adjusting the scale of the model accordingly.