About this 3D model

Yet another kind of boardgame trays (to contain game elements like token while playing). This one : Is parametric (width, height, options activated or not, various radius, walls sizes, …) (source file is provided) Is especially designed for hexagonal shapes (other ones may be worked on if needed) Easy to print (no support needed) Grow as you need : just print / add new bowls over time as needed (optionnaly) Trays can contain some magnet holes for trays to stick in place on the sides (pre-generated files are for 10x1mm magnets) (optionnaly) Trays are somehow (lightly) stackable (optionnaly) Trays can contain some dividers (0, 1 or 2 dividers, leading respectively to 1, 2 or 3 internal areas) In the files section, you'll find : Some pre-generated “.STL”, with what i'm using on my side (with magnets holes, stackability, and regular / somehow “ideal” or at least “generic” sizes) The corresponding .3MF for Bambu Studio (Bambu Lab X1C, P1S, P1P, …) (just in case) The original source file , as a “.scad” file (to be opened / edited with [OpenSCAD](https://openscad.org/)) About printing. Nothing special (no support needed), can be printed with any kind of settings regarding infill, number of walls, … Example of one printing on a Bambu Lab X1C with PETG (less than 2 hours of printing and less than 50g of filament) : About magnets. The magnets holes are located on the sides of the trays. The provided “.STL” files are designed to be used with 10mm x 1mm magnets (foundables on Aliexpress here (6 magnets needed for each tray) - aliexpress link (3€ for 30 magnets) : https://fr.aliexpress.com/item/1005005297582725.html? spm=a2g0o.order_list.order_list_main.5.22195e5bA8VrOE&gatewayAdapt=glo2fra The alignment of magnets has to be like this, in an "North/South alternate way : About OpenSCAD source file. Several options are available at the beginning of the file and could/should be self-explanatory (feel free to experiment). All “basic options” should work flawlessly (to make bigger / smaller bowls, or adjust magnet sizes, and so on). However not every single possible combination of options is going to work at this time in the .scad - you'll have to try and adjust / adapt (for example dividers may not work with all shapes, and so on).