About this 3D model

House number frame with all the numbers. I printed mine in ASA because it is very important that you take a filament that can withstand different weather conditions. I also did a couple of coats car varnish on the wood, frame and numbers so i would be sure that water would not have a chance to destroy it. The Dimensions of the wood are: 225mm wide x 123mm high, The gape to place the wood in is 5.2mm so 5mm thick wood should do fine otherwise you can sand the edges a bit so the are a little thinner. Then you glue everything together and hang it up. If you have a problem please let me know and i will try to help you. 3D printing settings use 3 walls, 15% infill and the parts except the numbers will need supports.