About this 3D model

Chinese stone lions, also known as guardian lions or foo lions, are symbolic sculptures traditionally crafted from stone and placed at entrances of significant buildings to serve as protectors against evil spirits. This one was designed and hueforged to give an illusion of depth, almost as though it were popping out of the painting. Its quite entertaining to see guests looking at the painting from various angles and trying to figure out what's going on ;) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Generic Black, Brown, Grey, Warm White PLA+ Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Brown At layer #5 (0.48mm) swap to Grey At layer #9 (0.8mm) swap to Warm White for the rest. Feel free to substitute Brown for charcoal or dark grey for a cooler tone. Makers that do not have an AMS should replace the color changes with pauses and manually swap filaments at the specified layers. Please use the provided print profile, which has been carefully tuned to give a good balance between speed and quality. Need a frame for this? Check out my Low Profile Frame for 20 x 20 Hueforge Prints ! Post your makes and have fun!