About this 3D model

Paper Towel Holder - Wall Mount A simple paper towel holder designed to be mounted to a wall or upright surface with screws. There are two different sized holders within the model, one to suit the standard paper towel roll found in Australia (Approx 215mm Wide (8.4 inches)) as well as the standard size used in the USA (Approx 280mm Wide (10.75 inches)). For the prints in the images, I used BambuLabs PETG Basic and found the dimensions and finish to be clean with minimal cleanup. The screws I used for this design are 10guage 18mm steel screws. If using this style of screw, recommend drilling a pilot hole no smaller then 3.5mm. My machine configuration Printer: BambuLab P1S Plate: Textured PEI Plate Hot end: 0.4mm hardened steel nozzle. Filament: Bambu Labs PETG Basic My Process settings for this print 0.20mm Standard (Filament Hanger) - Default with the below changes - Strength Wall Loops - 4 Detect Thin Walls - Checked Sparse Infill Density - 24% Support Enable Support - Checked Type - Normal(auto) Others Brim type - No-brim