About this 3D model

Remember if you sant to scale, do it only with x and y axis, z must be the same as original. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Gray At layer #13 (1.12mm) swap to Silver At layer #19 (1.6mm) swap to Jade White for the rest.