About this 3D model

Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I printed on a 0.6mm nozzle, if you print on 0.4mm it is very likely that you can use a higher layer Print settings: models: box, cap, case_part_1, short_screw, long_screw layer heihgt: 0,12mm (if you use 0,4mm nozzel probably can you use bigger layer) supports: NO infill: 5% models: cup, case_part_2 layer height: 0,2mm-0,24mm (if you have good cooling you can try use bigger height) suports: NO infill: 5-15% models: screwdriver infill: the more the better supports: NO layer height: at your discretion If you have a problem, please DM me