About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Can be scaled as long as you keep the height (Z). You can use other black/white/grey if you are not having the specific once to get similar results. Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG JAYO White Transmission Distance: 6 Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Gray At layer #15 (1.28mm) swap to White for the rest.