About this 3D model

Hello, this is a special Drum used in Argentina for the Murga, it sounds for real! you can customize the logo, (i put a default murga logo) and you can also customize colors by choose yours Mounting Istructions print the plate 1 (x2) print plate 2 (x1) print plate 3 (x1) you also need 6x M5x133mm bolts with round head (or you can cut yourself a 5mm threaded rod at 13cm 6x self locking nuts (12x if you cut the rod) 12x washers inner 5,4mm out 15mm 1x couple of platillos 1 push spring you also need a m5 or m6 bolt with nuts and washers for mounting the plate on top, but measures depends on what spring and plate (platillo) you use