About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Ivory White Transmission Distance: 4 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 Swap Instructions: Start with Ivory White At layer #11 (0.96mm) swap to Ash Gray At layer #17 (1.44mm) swap to Dark Red At layer #20 (1.68mm) swap to Charcoal for the rest.