About this 3D model

LOXBERRY / HOME ASSISTANT / SUPPORT PI SUR RAIL DIN Home automation project: Looking for a support for my Pi 5, I found that the products of the Loxone range were cool I therefore recreated under the same model a case for Pi 4 B or Pi 5 It can hold a Pi 4 B or Pi 5 as well as a Combee 2 Zigbee USB stick Two models available: 1st box with a support for diode and on/off button « plate 1 » for the first one, in addition to the Pi, you will need two additional elements 2.5mm x 7 mm square diode Momentary tactile push-button microswitches “NO” of 6x6x9mm Momentary tactile push-button microswitches “NO” is for the on/off power button of the Pi the two are glued together with glue or hot glue to hold them - The second is a neutral shell without button without LED « plate 4 » It's up to you to choose which model you want :-) For assembly you will need some screws: m2 x6 to assemble the chassis / m2.5 x 4 for the Pi and 4 threaded inserts 2.5 mm Assembly is quite simple, but if you have any questions or suggestions for modifications, feel free to ask! I hope you like this project, others are coming on the same base