About this 3D model

I designed this riser to elevate my dogs' and cat's food bowls to reduce the strain on their backs and spines. The dogs are short, but with the bowls on the ground I could tell using these would be more comfortable for them. I'm including source files from Fusion 360. This is provided for personal use, and no permissions are granted for selling products produced with this model, or derivation The sizes of most dimensions are parameters, so it's highly adjustable. I created three different sizes for my dogs, as you can see in the pictures. Here are details: parameter description units base_height Height of the front vertical face mm inner_dia Diameter of the inside braces mm inner_support_depth Support spokes can be raised or lowered to fit particular dishes mm inner_support_width Width of the inner ring, offset from inner_dia mm outer_dia Outer ring to hold the outside diameter of the food bowl inserted (inside face, not including the width of the wall) mm outer_retainer_height Height of the outer ring to hold the food bowl mm outer_retainer_thickness Thickness of the outer ring that holds the bowl mm nameplate_arc Degree width of the front nameplate degrees support_length Length of each spoke with enough extra to account for extrusion mm support_offset Width of each spoke / 2 mm num_of_supports Number of total supports # tilt_angle Angle from front to back, providing the tilt if desired degrees emboss Depth of the pet name on the front nameplate mm nameplate_depth Used to create the front nameplate base mm dia_plus_nameplate_depth Calculated - Distance from the center point to the front of the nameplate base mm