About this 3D model

Summary Original File Would not fit on a standard ender 3 v2 I shortened the gap between Batteries and chamfered the ends. Also made the center a tray to hold other items. To print on and ender 3 v2 rotate the item diagonally and it should fit. I chose to do supports at 85* Handle does not need them but some other parts i feel may have. V3 I successfully printed with no supports. added radius to the handle so it feels more natural carrying it. Also fixed some misalignment with the handle with the original rescale making it fit the smaller build plate so should be much stronger. Also removed the upper center support as it is not needed and just wasted material. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: .4 Infill: 45 Notes: Infill more or less as needed Haven't tested long but may update later. this is a 19 hour print at .4 thickness and 4 walls with 45% cubic subdivision infill. V3 reduced print time and material. Printed with no supports with infill every two layers got down to under 14 hours. The A1 with .6 nozzle has dropped the production time to under 9 hours at .4 layer height.