About this 3D model

Hello. I made this for my second key that doesn't have remote. Searched before kits with uncut keys with integrated remote… but In my country the prices only for key cutting it's abusive, and you need to pair your key/immobilizer by your own… Because of this searched the standalone pcb to provide remote for my 2003 ford focus. See the attached photo of the pcb, you need to buy the same or otherwise you will probably need to modify the pcb frame. Example: https://es.aliexpress.com/item/1005005191477049.html?spm=a2g0o.order_list.order_list_main.5.63c1caa4HP55Ct&gatewayAdapt=glo2esp BOM Remote PCB (see photos and link) CR2032 battery 3x M3x12 screws 3x square nuts 1x thin wire PRINTING You can use the file “Ford remote fob - ready to go all objects correct orientation.3mf” , has the correct printing orientation and supports for each piece. Otherwise you can see the photos. You can print with with PLA, PETG, ABS….. recommended PETG because holds better impacts and abuse than PLA and need to print only one version (MMU or not MMU) Your printer needs to be properly adjusted, you don't need a top tier 3d printer to make the print, only need the correct flow calibration and e-steps. This model has been tested on. Prusa mk3s+ Voron Trident Artillery X1 (properly adjusted) ASSEMBLY Solder two wires on PCB contacts. Fit the pcb inside the frame. Press the PCB all the way Put the square nuts inside their pockets Fit the button frame put the buttons on the top Fit the case, it's better if you put from above. Twist the cables as shown in the photo Put the battery, take care with the polarity Put the negative wire on the top Fit the top and close PAIRING/PROGRAM THE REMOTE WITH YOUR FORD There are two methods, you need to search the method that works with your Ford. Mine's it's the following. Put the key in the ignition In less 6 seconds put the key in positition 2 (II) and quickly in 0, repeat 4 times, you will hear a beep if you done correctly. In less 10 seconds, press any button of the remote, you will hear a beep, if not, the remote will not pair, you need to do this with all your remotes (see my video, y press both remotes, and 2 beeps. When done, put the key on position 2 (II) and quickly in 0, this exit program mode. If you accidentally unpair your other remote, just repeat the process. CARS Supported You know… thats the manufacturer said… Tested on fiesta mk5 and focus mk1 for me…. Ford Fiesta 2001-2002 Ford Focus 1998-2004 Ford Mondeo 2001-2007 Ford Ka 2002-2012 Ford Transit 2008-2012 Ford Galaxy 2006-2010 Ford C MAx 2003-2010 Ford X Max 2006-2010 Ford Kuga 2008-2010