About this 3D model

The USM Haller office table system is great, especially their computer mounting system “CPU holder” (CPU-Halter). Since more and more companies are switching to notebooks, they are not used anymore and you get them for quite a nice price on sources like ebay. Downside is: they are designed to be mounted on very specific rail with cutouts on the USM Haller desk system - but i wanted to use them on my regular, good old flat top desk, so i designed this adapter. BOM 1x “ USM Haller CPU holder ” 6x M4x25 screws 6x 4,3x15 washers 6x M4 nuts 2x M4x10 screw (you can use 2 of the original screws) 6x Screws to mount the adapter to the desk (4x35 wood screws for example) Printing flat on the build plate supports only on build plate i used 6 walls, 5 top & bottom shells, 30 % infill use a ductile and somewhat elastic filament (PETG or ABS), but avoid brittle filaments like PLA with catastrophic failure modes since you'll hang your PC on that thing, don't save on filament and time :) Assembly Remove the mounting angle from the USM Haller CPU holder (6x M4 screws) Place the holder piece on the Adapter and mount the M4x25 Screws with washers and nuts Screw in the 2 smaller M4 screws to the front face Mount the holder on your desk with the provided screw holes Hang the PC on the holder (like it is done on the orginal USM desks)