About this 3D model

Drawer Pulls for your custom / retrofit drawers: These are 3d printable drawer pulls, that are installed over the top of the drawer front and fixed at the back with 2 screws. Assuming you plan and make the inter-drawer gaps large enough to accommodate 2mm drawer pulls, you can get away with using these without a recess being cut. If you like the sleeker look, you will need to allow for the 2mm thickness of the drawer pull. Dimensions & Sizes: 4 versions are supplied in 55mm, 85mm ,110mm & 145mm widths. If these don't exactly meet your needs, these can be scaled a little from the closest size, at the expense of the mounting holes elongating. If you need significantly other sizes, let me know. The reach of these pulls is 38mm from the back of the mounting side to the tip of the round nub. This works well for 12-15mm drawers fronts, but may feel a little tight if 18mm fronts are used. You can obviously scale to resolve if required. If people need longer reach pulls, just let me know. Print Orientation: These take longer to print than you would expect as they are printed rising up from the bed. This is to ensure strength in the pulling direction. Note, if only printing 1 it takes about the same time if you clone the size you want and print a second along side it. Model Usage Notes: Simply open the model, delete the sizes you don't need. Clone the remaining model as many times as you want and print. The model is intentionally slowed down to ensure consistent speed across the outer walls to minimise any gloss differences on layers containing holes. You can try the faster profile if you want to see if your filament shows any visual artefacts from variable speed if you want a quicker print. Black drawer pulls look good - pick whatever suits your needs, but pick something better than my prototyping white ;-)