About this 3D model

Boost Me You like the Design? Consider using your boost tokens to help and support me for free! - Want to earn easy reward points? Rate the print profile by going to the Rating link on your Profile drop down menu. - My own link is https://makerworld.com/en/@neocrisis/rating Summary Update 2/5/19: After several weeks of testing, it seems I need to increase the clip length to 200% in Cura (Uniform scaling turned OFF!) . This is because the clips randomly popped off. I will update this later to see if this fixes my issue I made a clip which holds the bag in place. It tears the bag a little but its not a major issue Dimensions (See attached image) Inside width is .6 in (15.24mm) Overall width of .9 in (22.89mm) Design has 1in depth This should help you edit the ratio in Cura to suit your needs. I used 90% width in cura to fit my trash can. Uniform scaling turned off! I used 10% zigzag infill. I used 50% depth ratio ( .5in depth ) and it turned out fine I am the owner of https://www.neocrisis.com