About this 3D model

A multicolor 3D model of KIRBY, as lightbox 4 Colors You will find each file named by color for an easy setting. Import them in Bambulab/Orca as single object with multiple parts. Assign each color to the same named part ( "wall" is always withe to create a nice bright outline) The “Backbox” have two 4.5mm hole for hanging and one more on the bottom for wiring Use a PEI Textured plate for an optimal result Print White for last To achieve a nice result be sure to have settings as follow first layer flow ratio = 1.05 wall transitioning threshold angle = 50° Infill/wall overlap = 20% Avoid crossing walls Once you have printed the model glue inside the backbox a ledstrip (multicolor or white) and wire it trough the provided hole (enlarge the hole with a solder if you need)… you have your lightbox ready! ^_^ Take a look to my Patreon ----- https://www.patreon.com/Valda3DPrinting