About this 3D model

Updates 25. Jan 2024 - 3 new sizes available! Want the beautiful organic look of voronoi AND the functionality of a twist-to-open box - then print this! Can be used as a bowl , stand or open container OR as a closed box - just twist to change ! Overview The model consists of 2 parts - ‘ Box ’ and ‘ Voronoi Lid ’. They come in multiple sizes . You can print the smallest one to test it out, before printing a bigger one :-) It comes in the following sizes: Tiny (Dia: 30 - Height: 30 - great for testing it out) Mini (Dia: 35 - Height: 35) Small (Dia: 61 - Height: 40) Medium (Dia: 81 - Height: 50) Large (Dia: 113 - Height: 70) Follow for more to come! Assembly That’s easy - print box + lid, and screw them together . It might be a little tough to screw together in first try depending on the print quality - but repeat some times to help. And maybe clean the voronoi lid on sharp edges. Print instructions The Box is simple to print. But there is one tip: Supports : No - not needed. (But the box has some bridging to make the handle on the bottom - printed just fine on my Bambu Lab P1S without supports) Regarding the Voronoi Lid is a few tips here: Supports : Yes - tree supports. (To support the different angles of the patterns. Requires some clean-up afterwards) Speed : Low-medium (Depending on the printer, maybe slow it down, to keep the small areas stable while printing) Orientation : The models are oriented in the correct print position Happy printing! Want to show your support? You can see ALL my designs on Printables - and you can become an active supporter . I would really appreciate it! https://www.printables.com/@GlennovitS3D#join