About this 3D model

➡️ Checkout the entire Ikea Skadis Collection ! Update 2025-04-09: New V2 ‘ hidden screws ’ panels Move mounting holes to get 4 more skadis holes by panel Add a 1mm ‘pocket’ on the back to prevent the panel not to be flush to the wall because of the anchors Added a sacrificial layer to avoid support Update 2025-02-13: Added 2 new variants with hidden screws (Countersink and Counterbore), + caps I love Ikea Skadis system, but I needed a stronger version to hold some heavy stuff. I made a heavy duty version! Comes in single print or separate as regular panel + spacer (Can be usefull if you already have some panels printed, otherwise go with the single print version) Skadis has to measure a multiple of 40mm, so the X1/P1/A1 can print the 200x240 version, or the 240x240 if you follow this guide to use the entire bed (without AMS only) . I provided a print profile for the 200x240, and I uploaded stl file from 160x160 (should fit in the mini bed) to 400x400, if you have a bigger printer. Note : They are made to be side by side mountable, I mean, you can use any Skadis accessories sitting on two panels at the same time