About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Should take about 3-4 hours Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Black At layer #6 (0.6mm) swap to Red At layer #8 (0.76mm) swap to Orange At layer #15 (1.32mm) swap to Ivory White for the rest.