About this 3D model

This is the waist-level viewfinder version of the Cangye C1Mark1 large format camera. The printed files are only for the body, you will need to prepare some additional parts and lenses to take photos. The lens needs to cover the large format, and the focal length should not be less than 100mm. You may need to modify the lens to use it with our camera. If you do not want to tinker with it, you can purchase related accessories directly from Taobao: Cangye Imaging Technology. Here is a list of parts you will need: 4 round magnets 10mm*2mm thick; 4 M4*6 or longer screws and matching nuts; 1 mirror (38*55mm); 1 roll of electrical tape; 1 sheet of A4 paper; Adhesive needs to use 502 and some double-sided tape.