About this 3D model

!Do this modification only if you are comfortable with electronics and a little tweaking! !Also at your own risk! Needed parts: Festool spare part (489925) Shrinking hose Round head wood screws 3,5 x 15mm (Ø-Head 7 mm) Installation: Solder the original connectors to the Plug-It Adapter, length about 90mm Push the Plug-It adapter into the Housing an secure it with two Round head wood screws 3,5 x 15mm Mount the housing to the Maktia BO5041 with the screws form the original stain relief and connect the wires as before Assemble the Top part Addition: Maybe you need to cut out the Top part like this: I cant tell if still necessary, because during testing i did this cut out. Filament: extrudr greentec pro (or ABS, ASA, PETG etc.) Print settings: orientation: see picture layer height: 0.12 wall generator: arachne wall loops: 4 Top/bottom layers: 6 infill: 15% gyorid support: yes, paint on like this: