About this 3D model

all parts snap together only 18g of filament is needed maximum spool width is 40mm, if you need longer one, scale the length in your slicer height of the spool: 50mm from top of its opening to the bottom :) Printing instructions: PLA or PETG is OK you need to print: 1x LEFT 1x RIGHT 1x ROD 1x BRACE print orientation as per picture - no brim, no supports I strongly recommend to print the rod SEPARATELY, or add brim if you have low bed adhesion use max layer height possible - pictured is 0.32mm @ 0.4mm nozzle use 4 perimeters and 15% infill (rectilinear) Version history: v1.1 18.2.2024 added bottom brace - snaps on and fixes wobble of the stand v1.0 26.1.2024 initial release