About this 3D model

Please Read This! NOTE! These Dry Pods are too wide for the AMS 2 Pro! A new Print Profile for dry Pods that I have designed specifically for the AMS 2 Pro has been posted here: https://makerworld.com/en/models/1321169-ams-2-dry-pod-system-v5#profileId-1357362 There are many alternate Print Profiles posted here. Some were created a long time ago, and include models of pods that are many versions back. As a result, they may not include improvements and changes that were added to the later versions of the Print Profiles. If you use one of these profiles, please do not complain if a problem that has been fixed in later versions is found in the profile that you print. I have no control over the non-Designer print profiles, and once posted, the poster seems to never look at them again, much less, update them… This Print Profile includes all the components you need to upgrade your AMS to use loose (silica gel) desiccant. And the additional Dry Pods allow the AMS to hold more desiccant, which will mean longer times between refreshes. And the Spool Pods provide even more space for desiccant, and add weight to spools so they don't bounce as much when they are empty. For Newbies: From Plates 1-7, pick a plate for the hygrometer that you want use. All the Pods on that individual plate will fit into your AMS 1. The remaining plates are optional. If the plate (1-7) that you printed did not include a funnel, then you can print just the funnel. There are additional plates for 'Claymore' pods which can be used if you vacuum pack your filament spools for storage, or Spool Pods, which can provide additional desiccant inside the AMS, or add weight to a mostly empty spool so it doesn't bounce around. Spool Pods can be used when storing filament, but they are sealed closed if you use vacuum bags and provide no drying benefit so they are not recommened for this application. If you are using regular plastic bags or a bins, then they work great. Four types of hygrometers are supported: Bambu or Amazon Round, Bambu or Amazon Rectangular, Xiaomi, and Vaikby. Note that the Print times defined by the print profiles above are for all the Plates in the respective Print Profile. Plate 1 of the All Dry Pods, Desiccant Trays, and Funnel Print Profile, which includes all the parts that you need to outfit an AMS with a round hygrometer, takes about 14.5 hours to print. If you use the Fast Dry Pods, Desiccant Trays, and Funnel Print Profile, the same Plate takes about 9.75 hours to print, but you give up some surface quality. Printing Plate 2 (without a Funnel) takes about 13.75 or 8.5 hours, respectively . Both Print Profiles generate fully functional and strong parts. The latest Print Profile has been expanded to make it more friendly to printing with Bambu Handy. Now there are multiple Plates, each configured for a different type of hygrometer or no hygrometer. See the V9 release notes at the bottom. The “All Dry Pods, Desiccant Trays, and Funnel" Print Profile has been printed by over 30,000 users successfully. My Profile was configured specifically for printing with Bambu PETG-HF, and it took several iterations to come up with the profile settings that would work reliably. However, these Print Profiles have also been successfully printed in PLA, ABS, and ASA. If you have issues with these print profiles please add a comment to say why. I can't improve them if I don't know how they are failing. Dry Pod Hygrometer options: Bambu or compatible Round Hygrometer with vertical or 30 degree tabs, with a hole all the way through it, which should generate more accurate measurements. A 42mm diameter x 14mm deep body and a 46mm diameter bezel is supported. (Plate 1 w Funnel and Plate 2, no Funnel.) Bambu or compatible Round Hygrometer with a shallow hole for the hygrometer, which allows the Dry Pod hold more desiccant, but may be less accurate in measuring the overall humidity level of the AMS. A 42mm diameter x 14mm deep body and a 46mm diameter bezel is supported. (Floating). Bambu Rectangular Hygrometer. A 45x26x15mm body and a 48x29mm bezel is supported. (Plate 4). Xiaomi Bluetooth Thermometer Hygrometer. A 43x43x12.5 mm body is supported (Plate 5). Vaikby Hygrometer. (Plate 6). Rear Desicant Trays are supported. To snap the covers on the tray pods, slide the cover in the against the front, then press the back down. Spool and Claymore Pods are also supported. All Pods support the Funnel . All the hygrometer Dry Pods have a hole all the way through them, which helps generate more accurate measurements and allows you to use a screwdriver or other tool to push the hygrometer out of the pod to replace its battery or change it's settings. The Rectangular, Xiaomi and Vaikby Hygrometer Pods use small (horizotal or vertical) tabs that mate to hold the hygrometers in place. Note, the requirement to use Supports for these pods, makes it it very difficult to have precise control over the height of the top tabs. It may be necessary to scrape the tabs with