About this 3D model

Skill Fruit Tree A detailed Palworld skill fruit tree prints for Palworld kingdom. Simply print nine other fruits and hang them as you like on the tree. Instructions Make sure to use the proper plate. Recommended to use purple glue on plate. Post-Prints Needle Plier (not tweezer) to remove support. Art Knife to cut away support contour for easier removal. Just be really gentle when removing supports. If you managed to break one of the leaf / branch or hook off, you can use super glue it back - it is not the end of the world. Step 1 - Remove plate off the printer and let it cool down first. Step 2 - While it is cooling down, you can use a flush cutter gently cut away top supports, best to twist it slowly. Step 3 - Example where to cut to remove supports. Profiles AMS Version Disclaimer Print quality is base on your filament brand, filament parameters and environment; please take research for the optimal printing quality. Profiles are optimized to ensure text is clear, minimal banding and minimal ghosting. Tips Clean the bed with dish soap (degrease). Avoid touching the bed surface with your bare finger. For non-textured bed, highly recommended purple glue application. Slow down print speed for tall prints. Updates Version 1.0 Initial Release This model is a fan base derivative work from the game contents. Not for commercial purpose, please read below for the license. Game contents, logos are all under the copyright by Pocketpair Inc. License: https://www.pocketpair.jp/guidelines-derivativework Media contents are from Pocketpair Inc. Press Kit.