About this 3D model

This is a lady Macbeth hueforge, that pairs with my previous Macbeth to form a full picture. This was created for an English Langauge Arts high school classroom. I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. Final Size is 200x200mm If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position Please post a picture of your printed copy! I'd love to see it! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 10 PLA Overture Red Transmission Distance: 5 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA Overture White Transmission Distance: 3 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #11 (0.96mm) swap to Silver At layer #27 (2.24mm) swap to White for the rest.