About this 3D model

NOTE This is just a re-upload of https://www.printables.com/model/31723-vw-california-t5t6-tarp-rails-hook by @Antoine_21086 , fixing the STLs. Original Description This thing makes it possible to fix a tarp (or another element such as a solar shower) on a Volkswagen California. Print instructions The hook and the plate are printed using a strong filament (PETG with Carbon) with 100% infill The sole is printed using a flex filament (TPU 98a) with 100% infill; You can also use the same strong filament as for the hook The button is printed using Prusament PETG filament with 15% infill. 1 - Requirements You will need: - The four printed parts - A 20mm M5 bolt with hexagon head - An M5 insert (I use the ruthex variant) - Some strong glue - A soldering iron 2 - Glue Glue together the hook and the sole on their respective flat face. Use a strong glue (I used "Pattex Extreme Repair"). Use the bolt to help you center both parts properly. Use clamps to maintain pressure. 3 - Insert Introduce the insert into the button using a soldering iron. 4 - Assemble Assemble all the parts together. Boost Me If you find this model useful, I would greatly appreciate a boost!