About this 3D model

A Clamp mount I created for my 3018 CNC. Each mount requires the following for assembly 1 Endstop (as pictured.) 2 M2 10mm Screws & Nuts 2 M3 16mm Screws & Nuts Attach the two sides together with one M3 screw and nut loosly and put the other M3 screw in place. Attach the Endstop with the M2 screws and nuts in place firmly. Put the assembly on the 10mm bar and attach the second M3 nut. Put in place and the end of the 10mm bar and tighten everything down.