About this 3D model

This abandoned Pool model functions as a Pocket Drop, Phone Stand, Magnetic Fidget Holder and also has a secret slide out stash area. I printed the above model using a solid stone pla and then used acrylic paint markers to color the painted areas. I have not yet attempted to print the full color model. I am waiting on the SnapMaker U1 multi-head printer to come in since I think the full color model would generate too much waste printed on a standard bambu labs printer. Besides, I thought this would be a fun model to paint by hand since the colored graphics are supposed to represent graffiti. I Highly recommend using the 3mf file as all of my settings area saved. The pool is printed with supports for the hidden drawer area. However the supports needed to be removed from the magnet hole area. A brim is needed for the rail. All of these settings are saved on the 3mf file. You will find there are two pools models included. One with MZM KickFlip graffiti and one without. The 3mf File contains 3 different options. I used the pool on plate number one and colored the graffiti with paint markers. To embed the magnets, the 3mf file will pause at layer 290 where you will insert a 8x3mm magnet into each of the (10) holes and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside the top of the pool. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.20mmm layer height. Filament: OVERTURE Rock PLA Filament 1.75mm, Marble PLA https://a.co/d/3HZARXE Please let me know if you have any questions. Thank you! Mike