About this 3D model

If you print a Rocker hook then the second hook must be mirrored. Resolution: 0.2 mm Wall loops: 5° hook 5-loops / 30° hook 10-loops Infill: 5° hook 20% / 30° hook ~40% but more is better Material: PLA , PETG Supports: No Brim No Screw hole Diameter : 5.2mm, 0.2 inch Hole Length : Hook D1 - 28mm, 1.10 inch Hook D2 - 25mm, 0.98 inch Hook D3 - 15mm, 0.59 inch Hook D4 - 13mm, 0.51 inch