About this 3D model

Another “Art Deco” Hueforge , this one is perfect for a Valentines gift for someone or just for yourself :) The dimensions are 180x180 mm so it fits nicely in a square frame (as seen on the pictures) The Main print profile is the 0.4 layer height variant, it takes longer to print but has more detail. The 0.8 layer height prints faster but is a little reduced in quality. The plate is now 180x180 but you could resize to bigger or smaller, just make sure you do not change the height (Z) so uncheck “uniform scale” when resizing. If you want to slice the file manually for use without AMS or other printer please use these settings : For the 0.4 Variant : Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Swap Instructions: Start with Black At layer #10 (0.56mm) swap to Red At layer #21 (1mm) swap to Orange At layer #34 (1.52mm) swap to White for the rest. For the 0.8 Variant : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Start with Black At layer #6 (0.6mm) swap to Red At layer #12 (1.08mm) swap to Orange At layer #18 (1.56mm) swap to White for the rest. I used Elegoo PLA , Black → Red → Orange → White Be sure to check out my other models and/or give me a follow :) If you want to support my work & creativity you could join my Patreon : https://www.patreon.com/3deekes Boost Me