About this 3D model

A practical tool to keep the door open, as well as a reliable door stopper for when the wife slams the door open, trying to catch you printing some gnarly stuff :). Automatic door catching function :). Assembly guide(as it worked for me): Add double sided tape to the sacrificial hole marking tool, as shown in the pictures bellow: Assemble the sacrificial hole marking tool, together with the door holder, and try placing the entire assembly in the right spot, as shown in the bellow video (this is the most difficult part from the entire process, I promise) 3. After you remove the main body of the holder, the hole marking tool should remain stuck on the wall, and it can use it to mark where you need to drill the necessary holes. 4. After you attach the device to the wall, if you loosen the screws, you will be able to slightly adjust the height, so that the hold on the door is tighter, or looser. Please let me know if you think that I could do the mounting process any smoother.