About this 3D model

Light box based on the Shelby Cobra GT500. Printed on a Bambu Labs P1P using 4 colours with a single AMS. This version is supplied with a 12mm hole in the back plate. I use 12V LED COB strips connected to a 12mm socket piece, and power it using an AC adapter. A version without the writing on the back and without the 12mm hole is also available. Parts that I use in my light boxes Note: I use components that are readily available through AliExpress. There are many variations of these items that you can use if you can find local suppliers. Item Comment Link 12V Mains adapter This is for the AU version, choose one that suits your location (1A) https://www.aliexpress.com/item/1005003438232392.html LED Strip I used the 3mm version as it's easier to bend around the light box. Choose the 12V version to match your adapter. The 320 LEDs item is bright enough for a light box. I usually choose the 1m versions - it can be trimmed if needed. https://www.aliexpress.com/item/1005005626311944.html DC 12v socket These fit nicely into the back plate of the light box with the pre-made 12mm hole. I solder the LED strip to the socket terminals. Only two pins of the socket are used. https://www.aliexpress.com/item/1005007870570657.html Inline switch This inline switch allows you to turn the light box off or on. https://www.aliexpress.com/item/1005005754107667.html