About this 3D model

This steampunk bookmark was made to test end-to-end the hueforge optimizer which is a GPT that can both generate hueforge optimized images through Dall-E and produce a starting point given the known filament choices. Try it for yourself if you have a GPT+ subscription: https://chat.openai.com/g/g-jtERUbNMX-hueforge-optimizer I've included the 3mf for easier use and the instructions are as follows: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Numakers Pitch Black Transmission Distance: 1.6 PLA+ Numakers Dark Gray Transmission Distance: 4.8 PLA+ Numakers Beige Brown Transmission Distance: 4 PLA+ Numakers Apricot Skin Transmission Distance: 11 PLA+(SILK) Numakers Gold Silk Transmission Distance: 12 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Pitch Black At layer #5 (0.48mm) swap to Dark Gray At layer #8 (0.72mm) swap to Beige Brown At layer #12 (1.04mm) swap to Apricot Skin At layer #16 (1.36mm) swap to Gold Silk for the rest. TikTok video of finished print: https://www.tiktok.com/@modern.magician/video/7330047789444959519