About this 3D model

Mini version (remix) of Rugged Box (Parametric) by Whity using single hinge. BOM (bill of materials) Mechanical parts : M3x30 SHCS/DIN 912 Bolts (Source: INT ) x 3 Printed Parts: Bottom, lid, latch, seal x 4 Print guidelines Here are print guidelines for you to follow in order to have decent success with printing parts: 3D PRINTING PROCESS Fused Deposition Modeling (FDM) INFILL TYPE Grid, Gyroid, Honeycomb, Triangle or Cubic MATERIAL PLA, PETG, ASA, ASA-CF, ABS, ABS+, ABS-CF INFILL PERCENTAGE 40% LAYER HEIGHT Recommended: 0.2mm WALL COUNT Recommended: 4 SOLID TOP/BOTTOM LAYERS Recommended: 5 EXTRUSION WIDTH Forced 0.4mm Assembly instructions Tighten screws until you hear plastic cracking, then ½ turn back. Then, re-print and repeat until succeed. (Just in case — this is for fun not an actual advice.)